Skip to main content
DIY
4 menit baca
Diperbarui Maret 2026

Cara Memperbaiki Keran Bocor

Panduan lengkap memperbaiki keran yang bocor atau menetes

Jawaban Cepat

Turn off water under sink. Remove faucet handle. Replace worn washers or cartridge (bring old parts to store). Reassemble, test.

Panduan Langkah demi Langkah

1

Turn Off Water Supply

Find shut-off valves under the sink. Turn them clockwise to close. Turn on faucet to release remaining pressure.

💡No shut-off valves? Turn off main water supply to the house.
2

Identify Your Faucet Type

Compression: Two handles. Ball/Cartridge/Ceramic disc: Single handle. Each has different repair parts.

💡Take photos before disassembly to remember how parts go back.
3

Disassemble and Replace Parts

Remove handle (usually a screw under cap). For compression: replace rubber washers. For cartridge: replace cartridge. Bring old parts to hardware store.

💡Most leaks are caused by worn washers, O-rings, or cartridges.
4

Reassemble and Test

Put everything back in reverse order. Hand-tighten, then snug with wrench. Turn water back on slowly. Check for leaks.

💡Don't over-tighten - can crack fixtures or damage threads.

Pertanyaan yang Sering Diajukan

Mengapa my faucet still dripping after repair?

Check if all washers/O-rings were replaced. The valve seat may be damaged and need smoothing or replacement.

Berapa banyak does it cost to fix a leaky faucet?

DIY parts: $5-30. Plumber: $100-250. A drip wastes 5+ gallons daily - fix quickly!

Haruskah saya replace the whole faucet instead?

If faucet is 15+ years old or heavily corroded, replacement might be more cost-effective than repair.

Panduan Terkait

🔧Lebih banyak dari kategori ini

Jelajahi topik lain

Apakah ini membantu?
Bagikan: